


Digital Control Fan Kit for Fridge in slide-outs, with high-volume fan
Listed as “Digital Fan Control Fan slide out room Kit w/High volume Fan” · Item 12038FKDT-SO
Not sure it fits your fridge? It's best to email your question with your fridge's model number; David will reply with an answer.Email your questionCall (901) 337-9948
Details
This Fan add on Kit either single Fan or a Double Fan, is a very easy install, usable on any brand or model RV refrigerator. You can purchase either a 1 or 2 Fan kit with mounting hardware with 12038 Fan/Fans for mounting in the upper vent door opening, Fully adjustable Digital Thermostat control with master 12 Volt DC power ON-OFF toggle switch mounted in a bracket holder, and built in fuse.
The Single or Dual FAN kit will increase the flow of air through the Condenser fins for fast removable of heat that was pulled from the inside food zone, the cooling of the inside of the food zone cools faster and able to maintain cold during the hottest of weather when you have a good flow of air through the condenser fins..
Adjustable Digital fan control thermostat which would be mounted at lower vent so you can adjust the fan ON OFF temperature setting as needed, shown not installed
The most important way for getting your RV refrigerator to cool correct, is good flow of air through the condenser fins. Fans are not used to remove heat from the compartment, they are only used to increase air flow through the condenser fins. Most RV refrigerators need the increased air flow when the out side temps reaches around 85 degrees or higher.
With our designed Digital Fan Control you can fine tune the ON or OFF of fan or fans added to your unit.
OEM thermostat all have pre-set temp to activate fans,
what if you need fans to turn ON sooner or Turn OFF later depending on the weather in your area.
The OEM style will not work that way.
Our Digital fully adjustable fan control will activate fan at any degree you select and you can change it as needed at any time.
The temp sensor can read surface temp or air temp depending on your install style, best area to attach is to zip type to the first coil loop above the tank to read surface temp, set the temp for 95 F.
Fan over all size and Specs.
4 3/4 by 4 3/4 by 1 1/4
RPM 2300
Amp 0.25
DC voltage up to 13.7v
DC Brushless
Ball bearing
These FANs are a great add-on for any refrigerator in a slide out room to help the air to exit out the upper vent.
