Tech help and install guides
Most RV dealers don't want owners to know how easy it is to change out a cooling unit yourself.
Not sure what's wrong with your fridge? Answer a few questions and the fridge troubleshooter will tell you what it most likely is, and what to try first.
You can do this yourself
All the cooling units we sell are easy do-it-yourself change-outs. No special skills, tools, welding, charging or license are needed. The units come to you ready to install, and the average change-out takes about three hours, start to finish.
Every cooling unit comes with a tube of thermal mastic (cold transfer compound), spray foam sealer to seal the foam block air-tight when it goes back in, and foil-backed tape for a clean finish.
Make sure it's the cooling unit first
Call before you buy. We'll help you troubleshoot and confirm whether you really have a bad cooling unit, and we can email you the complete “How to Change a Cooling Unit” instructions so you can see the job before you decide to do it yourself.
Before you order
- Find your model number. It's on a sticker inside the fresh-food compartment, usually on a side wall, or on the data plate.
- Norcold: check the heating element bend. Many Norcold units come in a 45° and a 90° version, and they aren't interchangeable. The listing title says which one it is.
- Two listings that look the same? Some models have more than one unit version, shown by the extra numbers in the listing title (for example 605a and 606a on Some Dometic units). Compare them with the label on your old cooling unit, or call.
Watch it done
RV Cooling Unit change outBy David Force · 7 min · 2011David's change-out video, watched over 42,000 times.
RV Cooling Unit replacementsBy David Force · 1 min · 2010A quick look at the Amish-built cooling units we sell.
Our Norcold to Amish Built Cooling Unit Change-outBy a customer (revansCAAD8) · 2012A customer replaces a failed Norcold 1200LR cooling unit with a brand-new Amish-built unit from us.Videos open on YouTube. David's channel: youtube.com/@rvcoolingunit.
Install manuals
Our step-by-step manuals, with photos of every step. Find the one for your refrigerator:
- Norcold 6 to 8 cu ft gas/electric (PDF, 51 pages)
Covers Norcold 682, 683, 483, 482, 8682, 8683, 6082, 6083, 6182, 6183, 982, 9182, 983, 9183, and more - Norcold Polar series 7 to 10 cu ft (PDF, 41 pages)
Covers Norcold N7V, N7X, N7LX, N8V, N8X, N8LX, N10LX, NA10LX, N10X, NA8LX, NA7LX, NAX841 - Norcold 1210 / 1211 four-door gas/electric (PDF, 64 pages)
Covers Norcold 1210, 1211 - Norcold 1200 / 1201 four-door gas/electric (PDF, 69 pages)
Covers Norcold 1200, 1201 - Norcold 2118 gas/electric (PDF, 60 pages)
Covers Norcold 2118 - Dometic 6 to 8 cu ft gas/electric (PDF, 53 pages)
Covers Dometic RM2852, RM2853, RM2862, RM4872, RM3862, RM3863, RM3962, RM4873, NDR1062, RM2652, RM2653, RM2662, RM3662, RM3663, and more - Dometic RM1350 four-door gas/electric (PDF, 58 pages)
Covers Dometic 1350 - Dometic side-by-side (1292, 1282, 1492, 7732, 7832, 7130) (PDF, 70 pages)
Covers Dometic 1292, 1282, 1492, 7732, 7832, 7130 - Changing a remanufactured Norcold cooling unit (PDF, 6 pages)
For our remanufactured Norcold units (and Servel). - Remanufactured Dometic: older-style fridge (with Freezer Bar Shelf) (PDF, 7 pages)
For our remanufactured Dometic units. For fridges with a Freezer Bar Shelf in the freezer. - Remanufactured Dometic: newer-style fridge (no Freezer Bar Shelf, Americana and NDR series) (PDF, 10 pages)
For our remanufactured Dometic units (and Servel). For fridges with no Freezer Bar Shelf. - Remanufactured Dometic: single-door fridge (PDF, 6 pages)
For our remanufactured Dometic units. For single-door Dometic fridges.
Install videos
- Norcold 634166 hinge kit install (video)
For the Norcold 634166 door hinge repair kit. - Polar series support band install (video)
For the door hinge repair kits with support band.
These open in Microsoft OneDrive.
Why replace the cooling unit instead of the fridge?
A new Dometic or Norcold refrigerator can cost in the high thousands, plus installation labor at around $150 an hour. A replacement cooling unit can be about a third of that.
