
Norcold RV refrigerator Door Hinge Repair Kit 634166 Lower Bottom LEFT Corner
Item 634166K-L
Not sure it fits your fridge? It's best to email your question with your fridge's model number; David will reply with an answer.Email your questionCall (901) 337-9948
Details
The Norcold Refrigerator Door Hinge Repair Kit for the LOWER LEFT CORNER is a high-quality unit made in the USA. It comes with a lifetime warranty and includes Screws for easy installation. Manufactured for Norcold older models, this kit ensures a durable and reliable repair solution for your RV, trailer, or camper refrigerator.
Door hinge repair kit can fix broken plastic hinge if part is missing/lost
If your Broken Plastic Hinge Area part is completely broken off and the broken part are lost, that’s not a problem. You need Our Metal Support Band. Place the Metal Support Band in place with our Door Hinge Repair kit. Now use a 2 part Epoxy Putty to fill the void by using the Epoxy Putty to form a new area missing for Metal Support Band to the Metal Hinge Repair hinge ring. Level off and let cure. Once cured hard, drill a new center hole if needed for your hinge pin. Now you are back with New fixed forever door hinge repair.
Of course, Our Door Hinge Repair kit I sell, repairs your problem, now along with our new Metal Support Band “it solves problem for good” by adding Our Metal Support Band around the Plastic Hinge area you will never have the problem again. My New designed Metal Support Band will fit both the standard Norcold Door frame like the ones listed below and we do have Polar series if you have Polar model that's another listing. As most RV customers know, replacement doors for the older models are not available and this Metal Support Band along with our Hinge Repair kit part kit 634166 will solve your broken door Hinge rather the plastic hinge is completely broken off which you can use JB Weld to bond back in place and the Metal Support Band will wrap around the broken hinge, holding it tightly in place by 3 screws and also use our Metal Hinge Repair kit to carry all the weight now it will be Stronger than when new with an all metal corner.
Shipped with screws and washer.
Standard Older 634166 fits Norcold models listed below uses hinge repair kit::
Fits Models like the N611, N621, N622, N641, NX641, NXA641, N811, N821, N822, N841, N842, NX841, NXA841, N1095
To install using the kits: simply slide the 2 tabs of the Metal Hinge Repair Kit under the Door frame in place with the Round Ring firmly around the bushing, mark your top 2 holes in the top Door Frame. Use a small drill bit to make a pilot hole to attach the screws furnished to secure Metal Hinge kit plate. If your Plastic bottom Hinge area is badly cracked or broken out, use JB Weld first, place back in place the Hinge Repair Kit screw down tight to form a strong Hinge repaired area. Now the Support Band will be place against front Door surface, mark your end hole first to screw down tight. The Support band will not fit flush when test fit, once the spring steel is flexed down tight, Mark the front 2 holes to pre-drill, use the screws furnished to secure the Support Band tight. If needed depending on the damage, you can apply JB Weld under the Metal Support Band too.
Picture is only for reference to show how the Metal Support Band would wrap around the Plastic Hinge area and Metal Hinge Repair Kit plate would look different depending Bottom Right or Bottom Left.
You do understand you must drill a hole for mounting this part. By ordering this part you have confirmed you read and understand, and you do not hold the seller responsible for damage you do for drilling a hole to mount and you made all judgement calls before doing so. You also know you can contact the seller at any time with any question and concern as well.
Other parts and units for the same fridges












