Fridge troubleshooter

  1. The problem: It's not cooling, or not cold enough Change
  2. Yellow residue or ammonia smell: No Change
  3. Electric vs. propane: Cools on electric, not on propane Change
  4. On propane: It lights, then goes out Change
  5. Lit by holding a knob or button: It lights by itself Change

You can check this yourself

The flame isn't staying lit

It lights, so propane is getting there. When it goes out again, the fridge usually isn't sensing the flame: a dirty or badly placed electrode, or a weak flame.

What to try

  1. Blow the dust out of the burner with compressed air.
  2. Check the electrode (the probe at the burner): clean, not cracked, about 1/4 inch from the burner.
  3. If it still goes out, the electrode or the control board may need replacing.

Ignition and burner partsPC boards

David Force Emailing or calling us? Tell us:

  • Your fridge's model number (on the sticker inside the fridge)
  • The problem: It's not cooling, or not cold enough
  • Yellow residue or ammonia smell: No
  • Electric vs. propane: Cools on electric, not on propane
  • On propane: It lights, then goes out
  • Lit by holding a knob or button: It lights by itself

Email is best: the button below writes these answers into the email for you, and David will reply with answers to your questions.

Email these to David or call (901) 337-9948

← Back Start over